"F-King Send Kit" F-Body Volare
Looking for the next aftermarket kit car, inspired by its predecessor? Want a rare chassis for your modern drivetrain? This F-Body does it all!
Our F-King Send Kit represents Richard Petty's kit car with modernized chassis architecture and proven aftermarket assemblies. Its available as a complete kit or rolling chassis that's designed for the 6.4L 392 HEMI Crate Motor. It's chassis variants are intended for NHRA 10.50 Classes and SCCA Road Race Classes. Available in two configurations and many factory paint codes.
Download a digital copy of the "F-King Send Kit" flyer
Learn more about our F-Body "F-King Send Kit" conversions.
These models are built from select 1976-80 F-Body Slant 6 and 318 models from used market inventory. We don't cut up original 360 R/T VINs!
At Ready Chassis, we pride ourselves on finding and building our stockpile from the best-used cores we can find on the market. Fair Mileage cores without major rust damage are taken from the dry United States climates.
Each car is hand-selected, disassembled, and then converted into killer door slammers or road racers, which get a NHRA or SCCA approval before delivery to any customer.
CHASSIS & SAFETY SPEC
- 10.50 ET certified Chromoly roll cage
- Lightweight FIA certified bucket seats
- SFI & FIA certified safety harnesses
- Window net and driveshaft loop
- Cross-form parachute & integrated mount (Drag)
- Tubular K-Member for easy oil pan access and weight savings
- AJE adapted double-adjustable coil overs
- Rack and Pinion Steering assembly with adjustable column
- Manual 15:1 ratio steering rack (Drag)
- Power steering 16:1 ratio steering rack (Road Race)
- Moser Live Axle Rear Suspension with Wishbone
- Locked differential with limited final drive ratio selections
- Double-adjustable coil overs
- Drag Race Anti-roll bar
- Moser Engineering high-count spline drilled axles kit
- Moser 8.75" Aluminum center section and housing
- Race Aluminum prop shaft
- Spicer u-joints & hardware
- 11" Brembo front & rear brakes
- Front: WELD racing15X4.5 aluminum (Drag)
- Rear: WELD racing 15X10 aluminum (Drag)
- Front: MTT-ET Front 26.0x4.0x15 (Drag)
- Rear: MTT-ET Drag Slick 28.0x9.0x15 (Drag)
- 5 Gal Fuel Cell & Lines (Drag)
- 15 Gal Fuel Tank & Lines (Road Race)
- Prefabricated Wire Looms & Bulkhead
- Pro-glass Windshield & Windows
- Line lock & brake pressure switch
- Terminator EFI & 7" Digital Dash
R2Rock® OPTIONS (Drag)
- Cope 518 with Overdrive (Drag)
- WELD Beadlock Lightweight Wheels (Drag)
- (Gen 3 Only) HEMI American Racing Headers (Drag)
- Intercooler & Rear Mount Ice Tank (Drag)
- Rage Wraps - 6.4 Wrap Option